Yaskawa

This option is used to extend an LCD or LED Digital Remote Operator to the wall of a separately priced, oversized UL Type 3R, 4, 4X, or 12 enclosur...

Single Encoder (PG) Feedback - Line Driver. This option provides velocity and direction feedback from an encoder. This is primarily used for motor...

Single Resolver (PG) Feedback - PM Motor. This option provides velocity and direction feedback from a resolver. This is used for motor feedback in...

EnDat Encoder. This option provides velocity and direction feedback from an EnDat rotary encoder. This is primarily used for motor speed feedback ...

Single Encoder (PG) Feedback - Open Collector. This option provides velocity and direction feedback from an encoder. This is primarily used for mo...

Digital Output (8 Channel). This option provides 8 additional digital outputs for use in monitoring the status outputs of the drive.Signal levels:...

Digital Input (8, 12, or 16 Bit). This option provides for the interfaceof an 8, 12, or 16 bit digital input (binary or BCD) to the drive. Signal ...

120VAC Logic Interface (8-Input). This option provides for the interface of 120VAC control logic circuits to the drive. This option is used for di...

Analog Output (11 Bit + Sign). This option provides 2 signals for remote metering of any two of the drive’s “U1” parameters. These are in addition...

Analog Input (13 Bit + Sign). This option provides for the interfaceof 3 high resolution analog inputs to the drive.  Signal levels (individually s...

Key Pad Adapter Kit. This kit can be used when a “new” A1000 key pad is replacing an “old style” key pad used with F7-based A1000 drives. This kit...

Digital Operator, LCD, Outdoor Viewable (JVOP-180CR). This option is the outdoor viewable keypad with reflective display to improve viewing in dir...

UL Rated Remote Outdoor Operator/Mounting Kit. This option provides all you will need to remotely mount an A1000 Digital Operator to the door/wall...

Digital Operator, LCD (JVOP-180C). This option is the standard digital operator found on the drive. This option is only needed if the original keyp...

UL Rated Remote Outdoor Operator/Mounting Kit. This option provides all you will need to remotely mount an A1000 Digital Operator to the door/wall...

Operator, LED Digital Remote, NEMA Type 1 - This option allows the drive to be operated from a remote location. It requires the RS232C Remote Inte...

Contains a similar bracket that the keypad attaches toand has non-threaded holes for mounting to an enclosure that has the screws attached to the ...

LCD/LED Keypad Installation Set A (Remote Operator MountingBracket Kit). This is a bracket to which the LCD Digital RemoteOperator (JVOP-180) atta...

MECHATROLINK-II. This option is designed for connecting a drive to a field network using the MECHATROLINK protocol. The MECHATROLINK-II option allo...

EtherCAT. This dual port option card is designed for connecting a drive to a field network using the EtherCAT protocol. The EtherCAT option allows ...

PROFINET. This option complies to PROFINET I/O device and PROFIDrive profile specifications. It allows connection of a PROFINET network and facilit...

This option mounts directly to the control terminal block on the drive and allows the use of 120 VAC control logic circuits to produce multi-functi...

This option mounts directly to the control terminal block on the drive and allows the use of 120 VAC control logic circuits to produce multi-functi...

Key Pad Adapter Kit. This kit can be used when a “new” P1000 key pad is replacing an “old style” key pad used with P7-based P1000 drives. This kit...

MECHATROLINK-III. This option is designed for connecting a drive to a field network using the MECHATROLINK protocol. The MECHATROLINK-III option a...

EtherCAT. This dual port option card is designed for connecting a drive to a field network using the EtherCAT protocol. The EtherCAT option allows...

PROFINET. This option complies to PROFINET I/O device and PROFIDrive profile specifications. It provides connection to a PROFINET network and faci...

This option provides an analog potentiometer for frequency control, mounted to the front of the J1000 drive.

Digital Operator (LCD) - This option allows the drive to be operated from a remote location. It requires the RS232C Remote Interface (SI-232/J), s...

This option allows the drive to connect to the USB port on a PC. It can read, copy and verify drive parameter settings from one drive to another li...

This option allows for RS232 communication to a Remote LED Digital Operator (JVOP-182).

Remote Interface, RS485/422. This option allows the drive to realize RS485/422 network communication with Modbus protocol.

USB Interface Cable. This 10-foot male USB-A to male USB-B cable provides a USB-to-USB connection from PC to the drive .