Yaskawa

UL Rated Remote Outdoor Operator/Mounting Kit. This option provides all you will need to remotely mount an A1000 Digital Operator to the door/wall...

Digital Operator, LCD (JVOP-180C). This option is the standard digital operator found on the drive. This option is only needed if the original keyp...

UL Rated Remote Outdoor Operator/Mounting Kit. This option provides all you will need to remotely mount an A1000 Digital Operator to the door/wall...

Operator, LED Digital Remote, NEMA Type 1 - This option allows the drive to be operated from a remote location. It requires the RS232C Remote Inte...

Contains a similar bracket that the keypad attaches toand has non-threaded holes for mounting to an enclosure that has the screws attached to the ...

LCD/LED Keypad Installation Set A (Remote Operator MountingBracket Kit). This is a bracket to which the LCD Digital RemoteOperator (JVOP-180) atta...

MECHATROLINK-II. This option is designed for connecting a drive to a field network using the MECHATROLINK protocol. The MECHATROLINK-II option allo...

EtherCAT. This dual port option card is designed for connecting a drive to a field network using the EtherCAT protocol. The EtherCAT option allows ...

PROFINET. This option complies to PROFINET I/O device and PROFIDrive profile specifications. It allows connection of a PROFINET network and facilit...

This option mounts directly to the control terminal block on the drive and allows the use of 120 VAC control logic circuits to produce multi-functi...

This option mounts directly to the control terminal block on the drive and allows the use of 120 VAC control logic circuits to produce multi-functi...

Key Pad Adapter Kit. This kit can be used when a “new” P1000 key pad is replacing an “old style” key pad used with P7-based P1000 drives. This kit...

MECHATROLINK-III. This option is designed for connecting a drive to a field network using the MECHATROLINK protocol. The MECHATROLINK-III option a...

EtherCAT. This dual port option card is designed for connecting a drive to a field network using the EtherCAT protocol. The EtherCAT option allows...

PROFINET. This option complies to PROFINET I/O device and PROFIDrive profile specifications. It provides connection to a PROFINET network and faci...

This option provides an analog potentiometer for frequency control, mounted to the front of the J1000 drive.

Digital Operator (LCD) - This option allows the drive to be operated from a remote location. It requires the RS232C Remote Interface (SI-232/J), s...

This option allows the drive to connect to the USB port on a PC. It can read, copy and verify drive parameter settings from one drive to another li...

This option allows for RS232 communication to a Remote LED Digital Operator (JVOP-182).

Remote Interface, RS485/422. This option allows the drive to realize RS485/422 network communication with Modbus protocol.

USB Interface Cable. This 10-foot male USB-A to male USB-B cable provides a USB-to-USB connection from PC to the drive .

This 6-foot cable interconnects the drive keypad port to the 9-pin communication port on a PC. This cable is used in conjunction with DriveWizard P...

PC Interface Cable. This 6-foot cable interconnects the drive keypadport to the 9-pin communication port on a PC. This cable is used inconjunction...

This 6-foot cable interconnects the drive keypad port to the 9-pin communication port on a PC. It requires theRS232C Remote Interface (SI-232/JC), ...

Flash Write Cable. This 6-foot cable connects a PC’s 9-pin serialport to the drive’s keypad port for updating the drive’s firmware,flashing with c...

This 6-foot cable connects a PC’s 9-pin serial port to the drive’s keypad port for updating the drive’s firmware, flashing with custom firmware, or...

These cables are used to connect the Remote LED Digital Operator (JVOP-182). They are available in one 1 meter length.

These cables are used to connect the Remote LED Digital Operator (JVOP-182). They are available in one 3 meter length.

LonWorks. This option is compatible with the LonMarkInteroperability Association and complies with the Functional Profilefor a Variable Frequency ...

Metasys N2/APOGEE FLN (P1). This option is designed to allow adrive to connect to either a Siemens APOGEE FLN (P1) or JohnsonControls Metasys N2 b...

MECHATROLINK-II. This option is designed for connecting a driveto a field network using the MECHATROLINK protocol. TheMECHATROLINK-II option allows...

MECHATROLINK-III. This option is designed for connecting a drive to a field network using the MECHATROLINK protocol. The MECHATROLINK-III option a...