LCD/LED Keypad Installation Set A (Remote Operator MountingBracket Kit). This is a bracket to which the LCD Digital RemoteOperator (JVOP-180) atta...
View full detailsContains a similar bracket that the keypad attaches toand has non-threaded holes for mounting to an enclosure that has the screws attached to the ...
View full detailsOperator, LED Digital Remote, NEMA Type 1 - This option allows the drive to be operated from a remote location. It requires the RS232C Remote Inte...
View full detailsThis option provides an analog potentiometer for frequency control, mounted to the front of the J1000 drive.
Digital Operator (LCD) - This option allows the drive to be operated from a remote location. It requires the RS232C Remote Interface (SI-232/J), s...
View full detailsThis option allows the drive to connect to the USB port on a PC. It can read, copy and verify drive parameter settings from one drive to another li...
View full detailsThis option allows for RS232 communication to a Remote LED Digital Operator (JVOP-182).
Remote Interface, RS485/422. This option allows the drive to realize RS485/422 network communication with Modbus protocol.
UL Rated Remote Outdoor Operator/Mounting Kit. This option provides all you will need to remotely mount an A1000 Digital Operator to the door/wall...
View full detailsDigital Operator, LCD (JVOP-180C). This option is the standard digital operator found on the drive. This option is only needed if the original keyp...
View full detailsUL Rated Remote Outdoor Operator/Mounting Kit. This option provides all you will need to remotely mount an A1000 Digital Operator to the door/wall...
View full detailsDigital Operator, LCD, Outdoor Viewable (JVOP-180CR). This option is the outdoor viewable keypad with reflective display to improve viewing in dir...
View full detailsKey Pad Adapter Kit. This kit can be used when a “new” A1000 key pad is replacing an “old style” key pad used with F7-based A1000 drives. This kit...
View full detailsUSB Interface Cable. This 10-foot male USB-A to male USB-B cable provides a USB-to-USB connection from PC to the drive .
This 6-foot cable interconnects the drive keypad port to the 9-pin communication port on a PC. This cable is used in conjunction with DriveWizard P...
View full detailsPC Interface Cable. This 6-foot cable interconnects the drive keypadport to the 9-pin communication port on a PC. This cable is used inconjunction...
View full detailsThis 6-foot cable interconnects the drive keypad port to the 9-pin communication port on a PC. It requires theRS232C Remote Interface (SI-232/JC), ...
View full detailsFlash Write Cable. This 6-foot cable connects a PC’s 9-pin serialport to the drive’s keypad port for updating the drive’s firmware,flashing with c...
View full detailsThis 6-foot cable connects a PC’s 9-pin serial port to the drive’s keypad port for updating the drive’s firmware, flashing with custom firmware, or...
View full detailsAnalog Input (13 Bit + Sign). This option provides for the interfaceof 3 high resolution analog inputs to the drive. Signal levels (individually s...
View full detailsAnalog Output (11 Bit + Sign). This option provides 2 signals for remote metering of any two of the drive’s “U1” parameters. These are in addition...
View full details120VAC Logic Interface (8-Input). This option provides for the interface of 120VAC control logic circuits to the drive. This option is used for di...
View full detailsDigital Input (8, 12, or 16 Bit). This option provides for the interfaceof an 8, 12, or 16 bit digital input (binary or BCD) to the drive. Signal ...
View full detailsDigital Output (8 Channel). This option provides 8 additional digital outputs for use in monitoring the status outputs of the drive.Signal levels:...
View full detailsInvite customers to join your mailing list.
Copyright © 2024 Control Concepts.
