Products

Modbus TCP/IP. This option complies with the Modbus TCP/IP protocol specification. This allows for Modbus communication over 10/100 Mbps Ethernet n...

Modbus TCP/IP with RSTP. This option complies with the Modbus TCP/IP protocol specification. This allows for Modbus communication over 10/100 Mbps ...

EtherNet/IP. This option complies with the EtherNet/IP protocol specification, and allows for communication over 10/100 Mbps Ethernet networks. Thi...

EtherNet/IP with DLR. This option complies with the EtherNet/IP protocol specification. This allows for communication over 10/100 Mbps Ethernet net...

PROFINET. This option complies to PROFINET I/O device and PROFIDrive profile specifications. It allows connection of a PROFINET network and facilit...

EtherCAT. This dual port option card is designed for connecting a drive to a field network using the EtherCAT protocol. The EtherCAT option allows ...

DeviceNet™ With ADR. This option complies with all pertinent aspects of the ODVA (Open DeviceNet Vendor Association) specification and AC drive pro...

Profibus DP. This option complies with the Profibus DP protocol specification. All parameters, diagnostics and operational commands are accessible ...

MECHATROLINK-II. This option is designed for connecting a driveto a field network using the MECHATROLINK protocol. TheMECHATROLINK-II option allows...

MECHATROLINK-II. This option is designed for connecting a drive to a field network using the MECHATROLINK protocol. The MECHATROLINK-II option allo...

LCD/LED Keypad Installation Set A (Remote Operator MountingBracket Kit). This is a bracket to which the LCD Digital RemoteOperator (JVOP-180) atta...

Contains a similar bracket that the keypad attaches toand has non-threaded holes for mounting to an enclosure that has the screws attached to the ...

Operator, LED Digital Remote, NEMA Type 1 - This option allows the drive to be operated from a remote location. It requires the RS232C Remote Inte...

This option provides an analog potentiometer for frequency control, mounted to the front of the J1000 drive.

Digital Operator (LCD) - This option allows the drive to be operated from a remote location. It requires the RS232C Remote Interface (SI-232/J), s...

This option allows the drive to connect to the USB port on a PC. It can read, copy and verify drive parameter settings from one drive to another li...

This option allows for RS232 communication to a Remote LED Digital Operator (JVOP-182).

Remote Interface, RS485/422. This option allows the drive to realize RS485/422 network communication with Modbus protocol.

UL Rated Remote Outdoor Operator/Mounting Kit. This option provides all you will need to remotely mount an A1000 Digital Operator to the door/wall...

Digital Operator, LCD (JVOP-180C). This option is the standard digital operator found on the drive. This option is only needed if the original keyp...

UL Rated Remote Outdoor Operator/Mounting Kit. This option provides all you will need to remotely mount an A1000 Digital Operator to the door/wall...

Digital Operator, LCD, Outdoor Viewable (JVOP-180CR). This option is the outdoor viewable keypad with reflective display to improve viewing in dir...

Key Pad Adapter Kit. This kit can be used when a “new” A1000 key pad is replacing an “old style” key pad used with F7-based A1000 drives. This kit...

USB Interface Cable. This 10-foot male USB-A to male USB-B cable provides a USB-to-USB connection from PC to the drive .

This 6-foot cable interconnects the drive keypad port to the 9-pin communication port on a PC. This cable is used in conjunction with DriveWizard P...

PC Interface Cable. This 6-foot cable interconnects the drive keypadport to the 9-pin communication port on a PC. This cable is used inconjunction...

This 6-foot cable interconnects the drive keypad port to the 9-pin communication port on a PC. It requires theRS232C Remote Interface (SI-232/JC), ...

Flash Write Cable. This 6-foot cable connects a PC’s 9-pin serialport to the drive’s keypad port for updating the drive’s firmware,flashing with c...

This 6-foot cable connects a PC’s 9-pin serial port to the drive’s keypad port for updating the drive’s firmware, flashing with custom firmware, or...

Analog Input (13 Bit + Sign). This option provides for the interfaceof 3 high resolution analog inputs to the drive.  Signal levels (individually s...

Analog Output (11 Bit + Sign). This option provides 2 signals for remote metering of any two of the drive’s “U1” parameters. These are in addition...

120VAC Logic Interface (8-Input). This option provides for the interface of 120VAC control logic circuits to the drive. This option is used for di...

Digital Input (8, 12, or 16 Bit). This option provides for the interfaceof an 8, 12, or 16 bit digital input (binary or BCD) to the drive. Signal ...

Digital Output (8 Channel). This option provides 8 additional digital outputs for use in monitoring the status outputs of the drive.Signal levels:...